BS2-2215-2CS/VT143 SKF Sealed Spherical Roller Bearing 75x130x38mm
Spherical Roller Bearings have two rows of rollers with a common sphered raceway in the outer ring and two inner ring raceways inclined at an angle to the bearing axis.

They are self-aligning and consequently insensitive to misalignment of the shaft relative to the housing and to shaft deflection or bending.

In addition to heavy radial loads, they can accommodate heavy axial loads acting in both directions.

Size 75mm x 130mm x 38mm.

·  Sizes - d=75mm, D=130mm, B=38mm

·  BS2 - Bearing, designated by a drawing number.

·  2CS - Sheet steel reinforced contact seal of acrylonitrile-butadiene rubber (NBR) on both sides of the bearing. Annular groove and three lubrication holes in the outer ring covered with a polymer band.

·  VT143 - Grease fill with an extreme pressure grease.

·  Spherical Roller Bearings can be used in a wide of industries such as lifting equipment, agricultural, pumps, air conditioning units, fans and general engineering applications